Wednesday, March 22, 2017

LCD 3.5 Digit (50,7 x 22,8 mm)

LCD display with 3 1/2 digit seven segment and indicator LOBAT,:, and + or -.


  • Power supply 3.0 - 5.0 V
  • Number of lines 1
  • Dimensions 51 x 30 x 12 mm
  • Parallel interface (every seven segments)
  • Number of columns 3.5
  • Type LCD lcd 7Segmen
  • backlight -
  • controller -
  • View area of 50.7 x 22.8 mm

ANT-433-SP 433MHz planar antenna

433 MHz frequency planar antenna packaged with Surface Mount Grounded fairly small. This planar antenna has a reasonably good performance so as to make the right choice for application on the remote control, pager and peringgatan system wirelessly.


  • Dimensions 27.94 x 13.7 x 1.5 mm
  • Working frequency 433 MHz
  • Voltage standing wave ratio (VSWR) 1.9
  • The input impedance of 50 Ohm
  • Gain - 6.4 dBi

Converter for connecting mcx socket and mcx socket

Converter for MCX MCX connector socket to socket
specifications:
- Type of terminal: MCX
- Type of form: Female
- Pitch: -
- The number of pins: -
- Mounting: Cable
- Mounting Angel: Straight

Switching Adaptor 5V/3A

Adaptor / DC power supply, switching types.
Specification:
- Input: 100-240 VAC / 50-60Hz / 0,5 A
- Output: 5 VDC / 3 A

Dot Matrix 4inch Yellow Green Super Bright 5x7 Tipe N

Dot Matrix 4 inch yellow-green

  • Colour Yellow Green
  • Dimension 4 inch
  • Type N
  • Number of points 5x7

Tuesday, March 21, 2017

Serial RS232 cable with DC power jack

RS-232 serial cable (female), incorporating a DC jack and white 8 pin connector.


  • Features Equipped Jack DC and white 8 pin connector
  • Interface or RS-232 port

S3A-301210 Case 3.0" x 1.25" x 1.0"

An electronic case of New Age enclosure with dimensions of 76.2 mm x 25.4 mm x 31.75mm. This case has a petite body size, but with a solid texture, so it is ideal when applied to the design of electronic circuits that are "dongle".

Specification:
- Material: Plastic
- Black
- Length: 76.2 mm
- Width: 25.4 mm
- Height: 31.75mm


datasheet

73391-0080 RF Connectors RA JACK PCB

SMA connector with 50 ohm input impendasi value that adopting right angle mounting styles. These connectors are capable of operating at frequencies up to 18 GHz, so it is ideal when used in applications of low frequency radio networks, medium, or high though.


  • SMA type terminal
  • Shape (female / male) Female
  • pitch -
  • Pin number 5 pin
  • Mounting throug-hole
  • Mounting angel right angle
  • Contact Material -
  • flows -
  • Packaging materials Zinc alloy nickel plated

Crystal 16.384MHz Low Profile SMD

Crystal-type low-profile SMD with a frequency of 16.384 MHz.


  • Capacitance of 18 pF
  • Working frequency 16.384 MHz

Monday, March 20, 2017

4511 cmos chip

BCD to 7 Segment Latch Decoder Driver (for 7 segment common cathode)


  • Power supply 3 V - 18 V
  • 16-pin DIP packaging
  • Function CMOS BCD-to-7-Segment Latch Decoder Driver
  • Propagation delay is 520 ns
  • Voltage level i / o CMOS

HCPL-316J-000E chip

Optocoupler which is equipped with Fault Status Feedback and desaturation to regulate output voltage gate. This optocoupler has the ability 2,5A output IGBT Gate Drive (maximum). By using an additional circuit, the output of the optocoupler is capable of controlling loads with a maximum current of 150A and 1200V voltage.


  • Emitter voltage 4,5VDC - 5,5VDC
  • Component output (transistor / triac) IGBT
  • 15VDC output voltage (min) - 30VDC (max)
  • Output current 2,5A
  • 1230V isolation voltage (peak max)
  • Switching speed of 500 ns
  • Packaging SO-16

Switching Adaptor 24V/3A include AC cord

Switching adapter with 24 VDC voltage value that is capable of flowing currents up to 3 A.

  • Features accompanied by AC cable
  • Voltage output 24 VDC
  • 3 A output current (max)
  • Power 72 W (max)
  • Power supply input 100-240 VAC

MB1030 LV-MaxSonar-EZ3 Sonar Range Finder

Module ultrasonic sensor that serves to measure the distance of an object.
The module presents the perfect mix in the application side object rejection or applications that require a narrow angle jet


  • current flow 2mA
  • The power supply 2,5VDC - 5,5VDC
  • Features using one transducer, the reading of data updated automatically with the interval of 50ms (20Hz)
  • Working frequency 42KHz
  • Interface pulse width, voltage analog, TTL UART
  • Distance measurement 0 - 6.5 m

Dot Matrix 4" Green Super Bright 5x7 Tipe N

Dot Matrix 5 x 7 green super bright type N with diagonali 4 inch size.

  • Color Green Super Bright
  • Dimension 4 "(inch)
  • Type N
  • The number of points 5 x 7
  • Number of LED / point 1

Dot Matrix 4inch Bi Color (red & green) Super Bright 5x7 Tipe N

2 colors red and green colors (red and green)

  • Code: 721-014
  • Type N
  • Number of points 5x7
  • Number of LED / 2 LED point

Sunday, March 19, 2017

4543 cmos chip

CMOS BCD-to-7 Segment Latch / Decoder / Driver for Liquid Crystals Displays

  • Power supply 3 V - 18 V
  • 16-pin DIP packaging
  • Function CMOS BCD-to-7 Segment Latch / Decoder / Driver for Liquid Crystals Displays
  • Propagation delay of 600 ns
  • Voltage level i / o CMOS

LM741CD SMD SO8

LM741CD an IC operational amplifier (Op-Amp) with a bandwidth of 1 MHz and an open loop gain of 200 V / mV. This LM741CD work at a voltage level 5 V - 18 V and supports single or dual power supply.


  • Power supply 5-18 V
  • Packaging SO-8
  • 2 mV input offset voltage
  • Gain bandwidth of 1 MHz

Saturday, March 18, 2017

Inductor 10uH

Inductor 10uH

10 microHenry

Fixed Terminal Blocks 4Pin 5mm 90DEG

4 pin terminal block capable of being used for a current of up to 28 A and is designed to be compatible with 24 AWG cable type up to 12 AWG.


  • Type terminal blocks Terminal
  • Shape (female / male) Female
  • Pitch 5 mm
  • Number of pin 4 pin
  • mounting SIP
  • Flow 28 A (max)

ISL9R30120G2 DIODE STEALTH 1200V 30A

Stealth diode is designed to work at a maximum voltage of 1.2 kV and currents up to 30 A. It is suitable to the scope and applications of high-power switching.


  • Packaging TO-247
  • Flow (forward) avg 30 A (Max)
  • Peak reverse voltage 1200 V
  • Recovery time 100 ns

Friday, March 17, 2017

Switch Slide DPDT L2.0mm SMD

Slide switch DPDT 6 pin configuration that can be operated up to 10,000 times the duty cycle. It is suitable when used as a switch in computer accessories, portable measurement devices, instrumentation devices, and so forth.

  • Pin number 6 pin
  • Dimensions 2 mm (length actuator)
  • configuration DPDT
  • Sliding switch mode
  • Logic On-Off

Dot Matrix 2.3" Red Super Bright 5x8 Tipe N

Dot matrix Red Super Bright 2.3-inch size.



  • Red
  • Dimensions 2.3 inch
  • Type N
  • Number of points 5x8
  • Number of LED / point 1 LED

Switching Adaptor 12V/1A

Switching 12VDC adapter.
Specification:
- Input: 100-240 VAC @ 50 - 60Hz.
- Output: 12VDC / 1000mA.

Alligator clip (red & black) , big size



Consisting of clip red and black alligator 

Thursday, March 16, 2017

3.5 digits Digital LED Panel Meter

Panel Meter for analog voltage that has an analog voltage input range 0-200 mV with a resolution of 1 mV.


  • 12 VDC power supply
  • Features Range of measurement 0-200 mV, a measurement accuracy of 1 mV, 1 second response time, LED brightness level automatically adjusts the circumstances surrounding
  • Dimensions 79.0 x 25.0 x 42.0 mm
  • The number of digits 3.5
  • Applications voltmeter, thermometer, wattmeter, dB meter, PH meter, etc.

Dot matrix 5x7 2" Red Hi bright N Type

5x7 dot matrix 2 "Red Hi bright type N

  • High Bright Color Red
  • Type Type N
  • The number of points 5 x 7
  • Number of LED / LED per point 1 point

Pushbutton Switch DDS-1431 Yellow Push Off

Pushbutton switch Yellow colored push off.


  • Pin number 6
  • Dimension 13mm (L) x 13mm (L) x 23mm (T) excluding foot pin
  • Configuration Push Off / Normally Close
  • Type pushbutton
  • Logic On - Off

Battery box with switch 4xAA

 battery holder 4xAA size that has been equipped with switch

74LS248 chip

BCD tp 7 Segment Decoder / Driver with open collector output configuration internally.


  • 5 VDC power supply
  • 16-pin DIP packaging
  • Function BCD-to-7-Segment Decoders / Drivers
  • Propagation delay of 100 ns
  • Voltage level i / o TTL

QT113-ISG chip

Charge transfer touch sensor.
Specification:
- Power Supply = 2.5 ~ 5.5 Vdc.
- Acquisition resolution = 9 bits (typ).
- Recalibration time = 550 ms.
- Charge duration = 2 us.
- Transfer duration = 2 us.
- Response time = 30 ms.
- Sensitivity range = 1000-28 fF.
- Heartbeat (pulse width = 300 us).
- Package: 8-pin SOIC (lead free).

datasheet

Wednesday, March 15, 2017

Dot Matrix Full Color 8x8 1.5inch Type N

Dot Matrix 8x8 full color with circle shape dot.


  • Color Full color
  • Dimensions 38 x 38 mm
  • Type N
  • Number of points 8x8

LM-01 black box the size of 100x76x38mm

Product Description
Solid plastic box
Specification:
- Box Size: 100 x 76 x 38 mm
- Black

ETB11 blue Terminal 2 pins and 3 pins type

ETB11 Series PCB Terminal Block. Wire Range = 14 to 22 AWG


  • Terminal type Terminal Block / Screw
  • Pitch 5 mm
  • Number of pin 2 and 3
  • PCB mounting
  • Mounting angel 90 deg
  • Metal contact materials
  • Flow 8 Amp, 300VAC
  • Packaging materials Polyamide, Blue

Monday, March 13, 2017

mcx plug and mcx plug converter

Converter for MCX connector plug to MCX plug
specifications:
- Type of terminal: MCX
- Type of form: male
- Mounting: Cable
- Mounting Angel: Straight

Saturday, March 11, 2017

RLD-420 Dot Matrix Display 20x7

Dot Matrix display module 20x7
Specification:
- Consists of 4 Dot Matrix 5x7
- Arranged into 20 columns x 7 rows
- Dot Diameter: 5 mm (per dot)
- Dot color: red (when lit)
- The number of dot: 140
- Forward voltage per dot: 2V
- Maximum Flow per dot: 25 mA
- Can dikaskade with similar models like the RLD-420 / RLD-421
- Compatible with the driver modules SR-430 / SR-431
- Equipped with 3 mm spacer hole
- Dimensions: 15 cm (w) x 6.3 cm (l) x 1 cm (t)

Dot Matrix Display 15x7 , Red

Dot Matrix display module 15x7
Specification:
- Consists of three pieces of Dot Matrix 5x7
- Arranged into 15 columns x 7 rows
- Dot Diameter: 5 mm (per dot)
- Dot color: red (when lit)
- The number of dot: 105
- Forward voltage per dot: 2V
- Maximum Flow per dot: 25 mA
- Can dikaskade with similar models like the RLD-420 / RLD-421
- Compatible with the driver modules SR-433A / SR-433B
- Equipped with 3 mm spacer hole
- Dimensions: 11.2 cm  x 6.3 cm  x 1 cm

Friday, March 10, 2017

74LS247 chip

Bcd-To-Seven Segment Decoders / Drivers with open collector output

  • 5 VDC power supply
  • 16-pin DIP packaging
  • Function BCD-to-7-Segment Decoders / Drivers
  • Propagation delay of 100 ns
  • Voltage level i / o TTL

Wednesday, March 08, 2017

Round Pin Header Double Side 32 pin

Round pin side Double Header

  • pitch = 2.54 mm
  • Male PCB terminal type Double Header Side
  • Shape (female / male) male
  • Pin number 32 Pin
  • PCB mounting

Wireless Antenna for WIZ600wi / WIZ610wi

Wireless antenna for WIZ600Wi / WIZ610Wi

Tuesday, March 07, 2017

IRLML6402TRPBF Mosfet

IRLML6402TRPBF a P-Channel MOSFET with a fairly fast switching capability and low resistance. This MOSFET is designed such that power consumption can be done efficiently

Siglent SDG1025 25MHz Arbitrary Waveform Generator

The SDG1025 Function/Arbitrary Waveform Generator represents a new level of price performance  value from SIGLENT.  The ergonomic design features a 3.5 inch TFT-LCD display;  Online help feature; Support for USB and internal storage to accomodate file management; . The SIGLENT SDG1025 implements a  DDS  ( Direct Digital Synthesizer) design which provides several technical advantages over older analog Function/Waveform generators including enhanced frequency agility, better phase noise and more precision to control the output phase across frequency switching transitions. 

Arbitrary Waveform Generation Capabilities:

The SIGLENT SDG1025 generates 14-bit 16kpts arbitrary waveforms, Arbitrary editing software (EasyWave) provides 9 standard waveforms: Square, Sine, Pulse, Ramp, Exponential Fall, Exponential lRise, Sinc, Noise and DC, which meets’ basic needs of all engineers; It is easy to develop your  own waveforms using EasyWave drawing software with your computer mouse.  Supports point-to-point line segment drawing and arbitrary point drawing.making it easy to create complex waveforms. Multi-file screen management helps the engineer  edit multiple-waveforms at the same time. It provides ten (10) Storage locations in non-volatile RAM. You can edit and store more waveforms on your PC by using the EasyWave sofware.

Main Features:

DDS technology, dual-channel output. Outputs are totally independent with adjustable phase shift.
125MSa/s sample rate, 14bit vertical resolution.
5 types of standard output waveforms, built-in 48 arbitrary waveforms.
Complete set of modulation functions: AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, burst.
Abundant input/output: waveform output, ‹ Synchronous signal output, External modulation source input, 10MHz clock input, external trigger input, internal trigger output etc. 
Channel coupling and duplication function 
Built-in accurate freq. counter allows the user to measure frequencies up to 200MHz (single channel) 
Standard interfaces: USB Device, USB Host, 
High precision clock
Supplied with powerful arbitrary editing software (EasyWave)
Supports Remote control
Arbitrary waveform output:

Built-in 48 arbitrary waveforms, including math, engineering and other commonly-used waveforms.

Complete set of modulation functions, sweep output, burst output.

Complete set of modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, the modulation waveform can be observed directly, which it is desirable for education and training sessions;
Sweep output: varies output frequency from start frequency to stop.  Sweep time range: 1ms~500s. The carrier can be Sine, Square, Triangle and Arbitrary waveforms. 
Burst output: It can periodically generate pulse sequences. Internal counter and external control signal are available to control burst output.
Dual-channel Synchronization:

Duplicating function 

Channel coupling: after setting the primary channel and coupling frequency/phase differences, the frequency/phase of the second channel will change in relation to the primary channel, maintaining the frequency /phase difference .
Channel duplicating: allows user to duplicate parameters from one channel to the other.
Built-in frequency counter:

Wide frequency range: 0.1Hz~200MHz. Measurable parameters: frequency, period, duty-cycle, positive pulse width, negative pulse width Ssetting: Adjustable parameters include DC/AC coupling, trigger level and high frequency rejection.

Specifications:

Maximum output frequency: 25MHz 
Output channels: 2 
Sample rate: 125MSa/s 
Arbitrary waveform length: 16kpts 
Frequency resolution: 1μHz 
Vertical resolution: 14bits 
Waveforms: Sine, Square, Ramp, Pulse, Gaussian Noise. 48built-in arbitrary waveforms(include DC)
Modulation: AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst
Frequency counter Range: 100mHz~200MHz
Standard interface: USB Host & Device
Dimension: Width x Height x Depth=229mm x 105mm x 281mm
Frequency Specifications:

Waveforms: Sine, Square, Ramp, Pulse, Noise, Arbitrary 
Sine: 1μHz ~ 25MHz
Square: 1μHz ~ 25MHz
Pulse : 500μHz ~ 5MHz
Ramp/Triangular: 1μHz ~ 300kHz
Gaussian white noise: 25MHz (-3dB)
Arbitrary: 1μHz ~ 5MHz 
Resolution: 1μHz 
Accuracy: Within 90daysv±50ppm within 1 year ±100ppm 18°C~28°C 
Temperature coefficient: <5ppm p="">
Sine Spectrum Purity:

DC~1MHz -60dBc 
1MHz~5MHz -53dBc 
5MHz~25MHz -35dBc 
Total harmonic waveform distortion ( Channel 1 & Channel 2)  DC~20kHz,1Vpp<0 .2="" nbsp="" p="">
Spurious signal(non-harmonic) 
DC~1MHz<-70dbc nbsp="" p="">
1MHz~10MHz<-70dbc db="" p="" phase="" spectrum="">
Phase noise 10kHz Offset,–108dBc/Hz(typical value)
Square:

Rise/fall time <12ns 90="" nbsp="" p="">
Overshoot <5 khz="" nbsp="" p="" pp="" typical="">
Duty Cycle
1μHz ~10MHz 20%~80% 
10MHz(exclude)~20MHz 40%~60% 
20MHz(exclude))~25MHz 50% 
Asymmetric(50% Duty Cycle) 1% of period+20ns(typical,1kHz,1Vpp) 
Jitter 0.1% of period(typical,1kHz,1Vpp)
Ramp/Triangle:

Linearity <0 .1="" khz="" nbsp="" of="" output="" p="" peak="" pp="" symmetric="" typical="" value="">
Symmetry 0%~100%
Pulse:

Pulse width 1800s, Max. 16 ns, Min. 8 ns resolution 
Rise/Fall time (10% ~ 90%,typical,1 kHz,1Vpp) 7ns 
Duty Cycle 0.1%Resolution 
Overshoot <5 nbsp="" p="">
Jitter(pk-pk) 8ns
Arbitrary:

Waveform length 16k points 
Vertical resolution 14bits 
Sample rate 125MSa/s 
Min. Rise/Fall time 7ns(typical) 
Jitter(pk-pk) 8ns(typical) 
Storage in non-volatile RAM memory (10 in total): 10 waveforms
Output Specifications:

Output Amplitude
CH1:
2mVpp~10Vpp(50Ω,≤10MHz)
2mVpp~5Vpp(50Ω,>10MHz)
4mVpp~20Vpp(high
impedance,≤10MHz)
4mVpp~10Vpp(high
impedance,>10MHz)
CH2
2mVpp~3Vpp(50Ω)
4mVpp~6Vpp(high impedance)
Vertical accuracy (100 kHz sine)
CH1 ±(0.3dB+1mVpp of setting value)
CH2 ±(0.3dB+1mVpp of setting value)
Amplitude flatness (compared to 100 kHz sine,5Vpp) ±0.3 dB
Channel phase deviation <400ps classic="" nbsp="" p="" sine="" value="" vpp="" z="">
Cross talk <-70dbc nbsp="" p="">
DC Offset:

Range(DC) 
CH1 ±5V(50Ω) ±10V(high impedance) 
CH2 ±1.5V(50Ω) ±3V(high impedance)
Offset accuracy
CH1 ±(|setting offset value|*1%+3mV) 
CH2 ±(|setting offset value|*1%+3mV
Waveform Output:

Impedance: 50Ω(typical)
Protection: short-circuit protection
AM Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary (2mHz ~ 20kHz) 
Modulation depth 0% ~ 120% 
FM Modulation(CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary(2mHz~20kHz) 
Frequency deviation 0 ~0.5*bandwidth 10μHz resolution 
PM Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary(2mHz~20kHz) 
Phase Deviation 0~360° ,0.1°Resolution 
FSK Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform 50% duty-cycle square waveform(2mHz~50kHz)
ASK Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform 50%duty-cycle square waveform(2mHz~50kHz)
PWM Modulation (CH1/CH2):
Frequency 500μHz~20kHz 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Arbitrary(except DC) 
External Modulation range -6V~+6V (maximum width deviation) 
Sweep (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Type: linear/logarithmic
Direct: Up/down
Sweep time 1ms~500s 
Trigger source: Manual, external, internal
Burst (CH1/CH2):

Waveform Sine, Square, Ramp, Pulse, Arbitrary(except DC) 
Type: Count(1~50,000 periods),infinite, Gated
Start/Stop phrase 0°~+360°
Internal period 1μs~500s
Gated source: External trigger
Trigger source: Manual, External or Internal
Rear Panel Connector:

External modulation: ±6V=100% modulation>5kΩ input impedance 
External trigger: TTL compatible 
Note: The external input voltage can’t be over ±6V, otherwise instrument gets damaged.
Trigger Input:

Input Level: TTL compatible 
Slope: Rising Edge/Falling Edge
Pulse width >100ns 
Input impedance >5kΩ,DC coupling 
Trigger Output:

Voltage level TTL compatible 
Pulse width >400ns
Output impedance 50Ω (typical)
Max. frequency 1MHz 
SYNC Output:

Voltage level: TTL compatible
Pulse width >50ns 
Output impedance 50Ω(typical)
Max. frequency 2MHz
Frequency Counter:

Measurement: Frequency, Period, Positive/negative pulse width, duty cycle
Frequency range: Single Channel:100mHz~200MHz
Frequency resolution: 6bits/s 
Manual DC Coupling:

DC offset range ±1.5VDC
100mHz~100MHz: 50mVrms~±2.5V
100MHz~200MHz 100mVrms~±2.5V
Manual AC coupling:

1Hz~100MHz 50mVrms~5Vpp 
100MHz~200MHz 100mVrms~5Vpp 
Pulse width and duty-cycle measurement:

1Hz~10MHz(50mVrms~5Vpp) 
Input adjustment:

Input impedance 1M ohm
Coupling mode AC,DC 
High-frequency rejection ON/OFF 
Trigger level range:

-3V~ +1.8V
General Specification:

Display 
Display type 3.5inch TFT-LCD 
Resolution 320×RGB×240 
Color depth 24bit 
Contrast Ratio 350:1(typical) 
Luminance 300cd/m2(typical)
Power
Voltage
100~240 VACRMS, 45~66Hz,CATII  
Consumption <30w p="">
Fuse 1.25A,250V
Environment 
Temperature
Operation:0°C~40°C
Storage:-20°C~60°C 
Humidity range 
Below +35°:≤90% relative humidity
+35?~+40°:≤60% relative humidity 
Altitude 
Operation: below 3,000 meters 
Storage: below 15,000 meters
Dimension
Width: 9 1/64th" (229mm)
Height: 4 9/64th" (105mm) 
Depth: 11 1/16th" (281mm)
Weight
N.W: 2.6Kg

Siglent SDS1052DL 50MHz Digital Storage Oscilloscope with Frequency Counter, 7'' TFT-LCD Display

The Siglent SDS1052DL is a 50MHz, two-channel, digital storage oscilloscope with a hardware frequency counter, a 500MS/s per channel sample rate, a 32kpts per channel record length, and advanced triggers for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. It has Edge, Pulse, Video, Slope, and Alternative triggers and its math functions include FFT (fast fourier transform). Additional specifications include a rise time of 7.0ns and vertical sensitivity to 2mV per division for capturing low-level signals. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The oscilloscope has RS232 and USB ports for communication, and a 7" color TFT-LCD (480 x 234 pixels) with an internal 8 x 18 division grid for viewing waveforms.



Features:
  • 50MHz, two-channel digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education
  • Maximum real-time sample rate of 500MS/s per channel and record length of 32kpts per channel for acquiring detailed waveforms
  • Advanced triggers for isolation of specific signals
  • Built-in frequency counter measures real-time frequency from 10Hz to 50MHz
  • 7" color TFT-LCD with an internal 8 x 18 division grid for viewing waveforms


Specifications
  • Bandwidth 50MHz
  • Channels Two
  • Display 7" color TFT-LCD
  • Power 100 to 240V, 50W
  • Weight 2.5kg
  • Dimensions (H x W x D) 157 x 323 x 136 mm



Monday, March 06, 2017

Rubber traction band

Rubber band for plastic wheel traction (PWGT / PWST), 2 pcs / pack.

1 package contains 2 rubber band

GM11 Mini Metal Gear DC Motor 75.7:1

DC motors are equipped with metal gearbox and has a small physical shape

Specification:
- Power Supply: 5VDC / 650mA
- No-load speed: 246 rpm
- Torque: 200gf-cm
- Configuring the output shaft: horizontal
- Direction of motor rotation: CW and CCW

Sunday, March 05, 2017

8KD-5 Thermistor 8K Ohm

8KD-5 Thermistor 8K Ohm's Figaro Gas Sensor

specifications:
- Rated zero-power resistance 8kΩ
- Dissipation factor: 3,5mW / ºC
- Thermal time constant 13s
- Rated power 297mW @ 25ºC

5KD-5 Thermistor 5K Ohm

5KD-5 5K Ohm Thermistor for Figaro Gas Sensor

specifications:
- Rated zero-power resistance 5kΩ
- Dissipation factor: 3,5mW / ºC
- Thermal time constant 13s
- Rated power 297mW @ 25ºC

Pushbutton Switch DDS-0432 Green Push On

Green Pushbutton type push on