Monday, November 30, 2015

CHIP mini-computer

C.H.I.P. does computer things. Work in LibreOffice and save your documents to C.H.I.P.’s onboard storage. Surf the web and check your email over wifi. Play games with a bluetooth controller. With dozens of applications and tools preinstalled, C.H.I.P. is ready to do computer things the moment you power it on!

The CHIP is a tiny, cheap single-board computer that features a 1 GHz Allwinner R8 single-core processor, 512MB of RAM, 4GB of storage, 802.11b/g/n WiFi, Bluetooth 4.0, and a composite video port. There’s also a USB port, a micro USB port, and a series of developer pins for attaching hardware.

Just don’t expect super-speedy performance if you want to use a device with a single-core ARM Cortex-A8 processor as a desktop computer or media center PC. The appeal of a device like the CHIP is its low price and its hackability, which could allow it to earn a place in the pantheon of low-cost, low-power multipurpose computing devices like the Raspberry Pi and Arduino.

Hardware Specs
CPU1GHz Allwinner R8
Wall PowerUSB 5V @ 300mA (peak)
Battery PowerSingle cell 3.7V LiPo battery w/ 2-pin JST-PH 2.0mm
USB1 standard & 1 micro with OTG
HDMINo (addon $13 HDMI accessory board is available, cheaper if bough with chip)
CompositeYes via ⅛” mini TRRS to RCA composite video output cable
LicenseOpen Hardware
OSCustom Linux, soon to be mainline Linux
IO Header type       Female headers
Dimensions40mm x 60mm
Included CablesComposite


The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!


  • 1Ghz, Single-core CPU
  • 512MB RAM
  • Mini HDMI and USB On-The-Go ports
  • Micro USB power
  • HAT-compatible 40-pin header
  • Composite video and reset headers

Hardware Specs:
  • GPIO 26 of 40
  • CPU 1Ghz BCM2835 (same as all pre-Pi 2 boards, but overclocked)
  • RAM 512MB
  • Storage MicroSD card (not provided)Wall 
  • Power USB 5VBattery 
  • Power None
  • WiFi None
  • BLE None
  • USB 1 micro with OTG; 1 microHDMI YesComposite None (hardware hack enabled, requires soldering pins to TV holes)
  • License Closed
  • OS Custom Linux, not mainline
  • IO Header type Through holes
  • Dimensions 65mm x 30mm x 5mm
  • Included  none

Saturday, November 28, 2015

Hall Sensor

  • 49E hall sensor
  • Features wide range voltage comparator LM393
  • Adjustable sensitivity
  • Signal output indicator


Power: 2.3V ~ 5.3V
Dimension: 27.0mm * 15.5mm
Mounting holes size: 2.0mm

Motor speed measurement
Object position detection
Smart car
Electronic bricks

How to Use

In the case of working with a MCU:

  • VCC ↔ 2.3V ~ 5.3V
  • GND ↔ power supply ground
  • AOUT ↔ MCU.IO (analog output)
  • DOUT ↔ MCU.IO (digital output)

Color Sensor

  • Sensor Chip: TCS3200 (RGB color detector)
  • Detects static color, the output is a square wave with frequency directly proportional to incident light intensity. Supports fill-light by onboard LEDs

Power: 2.7V ~ 5.5V
Ideal detection distance: 10mm
Dimension: 36.0mm * 20.6mm
Mounting holes size: 2.0mm

Sorting by color
Ambient light sensing and calibration
Test strip reading
Color matching

How to Use
In the case of working with a MCU:

  • VCC ↔ 2.7V ~ 5.5V
  • GND ↔ power supply ground
  • LED ↔ MCU.IO (controlling the 4 white LEDs)
  • OUT ↔ MCU.IO (RGB color output frequency)
  • S0/S1 ↔ MCU.IO (Output frequency scaling selection inputs)
  • S2/S3 ↔ MCU.IO (Photodiode type selection inputs)
  • S0/S1 selects the output frequency scaling factor, S2/S3 selects the color filter of red, green, blue, then OUT outputs a square wave with frequency proportional to the selected color intensity. The detected color can be determined by the ratio of the intensity of red, green and blue.

DJI Inspire 1 Quadcopter with 4k Video Camera with Controller

DJI’s most advanced technology comes together in an easy to use, all-in-one flying platform that empowers you to create the unforgettable. This version comes with 1 controller. You can add an additional controller later or purchase a bundle with a second controller instead.

Set Contains:
  • Aircraft Body (1)
  • Remote Controller (1)
  • Camera with Gimbal
  • Propeller Pairs (4)
  • Intelligent Flight Battery
  • Battery Charger
  • SD Card (16GB)
  • ND Filter
  • Manuals
  • Power Cable (1)
  • Micro-USB Cables (2)
  • Remote Controller Charging Cable
  • Harness
  • Camera with Gimbal Box
  • Carrying Case

Moisture Sensor

Fork-like design, make it easy to insert into the soil
Output voltage boosts along with the soil moisture level increases


  • Detection depth: 38mm
  • Power: 2.0V ~ 5.0V
  • Dimension: 20.0mm * 51.0mm
  • Mounting holes size: 2.0mm


  • Auto watering system
  • Flowerpot soil moisture detection
  • Auto pouring system

How to Use

In the case of working with a MCU:

VCC ↔ 2.0V ~ 5.0V
GND ↔ power supply ground
AOUT ↔ MCU.IO (analog output)

LSM303DLHC Board

LSM303DLHC Board 
High performance e-compass, 3D accelerometer and 3D magnetometer 

The LSM303DLHC Board is an accessory board which features a 3D digital linear acceleration sensor and a 3D digital magnetic sensor, provides 16 bit data output via I2C interface.

The LSM303DLHC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, it's more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.


LSM303DLHC, I2C pinheader, I2C connector

Friday, November 27, 2015

DJI Phantom 3 Standard

With the Phantom 3 Standard, DJI introduces 2.7K ("UHD") aerial video acquisition to the Phantom line. Its dedicated camera is mounted via a 3-axis motorized gimbal that stabilizes the footage and enables manual tilting from a dial on the controller. The control signal operates on 5.8 GHz, plus there is a 2.4 GHz Wi-Fi downlink for live 720p video monitoring and app-based control using DJI's free GO app. Thanks to a Wi-Fi range extender, the Wi-Fi boasts a range of 3280' line-of-sight. GPS equipped, the Phantom 3 Standard sports the assisted flying features, such as automatic return home, that have become staples of the Phantom series. Thanks to redesigned, more efficient motors, flight times of up to 25 minutes are possible.

A ready-to-fly-quadcopter, the Phantom 3 Standard comes prepackaged with the basics to get your started: a radio controller (transmitter), flight battery and charger, two sets of props, a mobile device clamp, 8GB memory card, and more. As will all multi-rotors, be sure to follow all pre-flight calibrations steps to ensure correct operation of the navigation system before hitting the skies. Comes with Extra Battery

  • 2.7K video and 12MP stills from the 3-axis stabilized integrated camera makes the Phantom 3 Standard a strong value
  • View a live image streamed from the drone up to a half mile away on the free DJI Go app using your mobile phone or tablet
  • GPS assisted flight features let you concentrate on getting great images while the drone helps you fly safely. You can achieve advanced camera perspectives with the Point of Interest, Follow Me and Waypoints modes (pending app feature availability)
  • Fly up to 25 minutes with the included intelligent battery
  • A range of accessories is included:1 battery and charger, 2 full sets of propellers, radio controller, 8GB micro SD card; comes with extra battery

Rotation Sensor

Detects clockwise/anti-clockwise rotations: degrees and laps


  • Pulses per lap: 15
  • Power: 3.0V ~ 5.3V
  • Dimension: 32.1mm * 15.4mm
  • Mounting holes size: 2.0mm

Positioning in Industrial Controls

How to Use
In the case of working with a MCU:

  • VCC ↔ 3.0V ~ 5.3V
  • GND ↔ power supply ground
  • SW ↔ MCU.IO (encoder button status)
  • SIB ↔ MCU.IO (output status)
  • SIA ↔ MCU.IO (output status)

Monday, November 23, 2015

4-Way 5.8 GHz Signal Splitter/Signal Combiner by L-Com

4-Way 5.8 GHz Signal Splitter/Signal Combiner by L-Com

HyperGain 5.8 GHz Signal Splitters / Signal Combiners are used for connecting more than one antenna to a single radio. They feature weather-proof construction and can be installed indoors or outdoors. This 4-way splitter can be used with amplified systems since they will pass DC power to all ports. HyperGain 5.8GHz WLAN Signal Splitters / Combiners are also available in 2-way models with N-Female and RP-TNC Jack connectors.

To ensure proper operation, any open splitter ports should be terminated with a high quality 50 Ohm terminator. We recommend the Hyperlink ANM-TERM1 0-6 GHz 50 Ohm N-Male Terminator.

  • Compatible with ISM, UNII and 802.11a Wireless LAN WiFi applications
  • Industrial grade cast aluminum construction
  • High performance glass reinforced hydrocarbon/ceramic laminate
  • Weatherproof for outdoor use
  • DC power will pass to all ports

  • Connect more than one antenna to a single radio Wireless Video Systems
  • 5.8GHz Wireless LAN systems

Wednesday, November 18, 2015

Liquid Level Sensor

Output voltage boosts along with the immersion depth of the module


  • Detection depth: 48mm
  • Power: 2.0V ~ 5.0V
  • Dimension: 19.0mm * 63.0mm
  • Mounting holes size: 2.0mm

Water level alarm

In the case of working with a MCU:

  • VCC ↔ 2.0V ~ 5.0V
  • GND ↔ power supply ground
  • AOUT ↔ MCU.IO (analog output)

Bolun WR-601 Microphone Transmitter Receiver Set

Bolun WR-601 Microphone Transmitter Receiver Set with Mini Clip Microphone

Tansmitter Dimensions: (3.7 x 2.52 x 0.87)" / (9.4 x 6.4 x 2.2)cm (L x W x H)
Receiver Dimensions: (2.76 x 1.77 x 0.63)" / (7 x 4.5 x 1.6)cm (L x W x H)
Microphone Diameter: 0.47 in / 1.2cm
Weight: 7.90oz / 224g
Modulation: FM
Frequency Response: 80 -12500Hz
Output Impedance: 600 ohm
Operating Voltage: 9V for Tansmitter / 1.5V for Receiver
Effective Distance: 20M


  • Ideal for aerobics/dance/sports instructors
  • Record audio on both left and right channels
  • Elegant style miniature microphone is perfect for video use
  • It is a handheld dynamic microphone, ideal for vocal and instrument  
  • Provide a perfect wireless solution for any presentation or performance application

Package Includes:

1 x Wireless Microphone
1 x Transmitter
1 x Receiver

Tuesday, November 17, 2015

Tilt Sensor

 tilt sensor by waveshare


  • Detects shake signal
  • Signal output indicator


  • Dimension: 19.0mm * 16.0mm


  • Shake detection
  • Guard alarm
  • Smart car
  • Electric bricks
  • How to Use

In the case of working with a MCU:

  • VCC ↔ 3.0V ~ 5.5V
  • GND ↔ power supply ground
  • DOUT ↔ MCU.IO (digital output)

Saturday, November 14, 2015

UL94V-0 Flame-resistant plastic case

Plastic Case, UL94V-0 Flame-resistant type, (125mmx80mmx32mm)

SU-140C Round Shape Plastic Case

SU-140C Round Shape Plastic Case, Small, Dark Gray

Battery Box Plastic Snap-in for 3XAA, color black

3XAA Battery box

  • Color :Black
  • Material : Plastic
 Disclaimer: Images are as represented by the manufacturer. Manufacturers occasionally make innovations in appearance without prior notice.

Friday, November 13, 2015

Alpha 2, the First Humanoid Robot for the Family

Alpha 2, the World's First Humanoid Robot for the Family. Intelligent, Interactive and Expandable!

What Can Alpha 2 Do? 
  • Alpha 2 makes a great work-out partner with the widest range of motion of any consumer robot.
  • Alpha 2 is smarter than your smart phone.
  • His conversation skills make Alpha 2 a great companion or tutor and even be an interpreter.
  • Alpha 2 is like an in-home nurse reminding you when medications need to be taken.
  • Alpha 2 is great to have around the office. Not only can Alpha 2 make calls and check voice mails, he can also read and send texts and emails, and control Wi-Fi office equipment to print and fax.
  • With a general knowledge database and web search function, Alpha 2 makes a great helper whether you're making home repairs or cooking dinner.
  • Alpha 2 is your own personal DJ, dancer and singer. 
  • Alpha 2 has face and voice recognition so he can personally engage with the whole family.
  • Alpha 2 is your personal photographer and videographer.
  • Alpha 2 can post to your social media, all you have to do is ask.
  • Alpha 2's VAPP can be updated just by asking. The expandable platform, accessed through the Alpha Store, means you'll always have new functions to add to Alpha 2.
  • Alpha 2 is an active storyteller.
  • Alpha 2 can control smart appliances like lights and locks.
  • Alpha 2 can also set Wi-Fi enabled alarms and act as a remote security monitor.

How Does Alpha 2 Work?
• Connect Alpha 2 to your WiFi network 
• Teach Alpha 2 to recognize your face & voice 
• Learn what you can ask Alpha 2 
• Download the VAPP (Android & i0S) to control Alpha 2 and add additional functions 

Hobot-188 window glass cleaner robot

Vacuum Zone 
Two cleaning wheels covered with a microfiber cloth move and rotate on the window surface of the some time a powerful vacuum sucks out the dust and removes the impurities. having an outstanding cleaning performance.

Suck Dust 
Most of the dust is sucked throughout the cleaning cloth by the vacuum. Even if our micro-fiber cleaning cloth contains partial dust and it wilt not scratch the gloss surface. due to its long fiber and softness.

  • Window Film 
  • Cooling Gloss 
  • Safety Foil 
  • Reflection Gloss 

Rotation Brush Gloss 
H0801-188 has two specially-designed cleaning wheels instead of a driving tread. It can move freely and smoothly on the window surface without any tracks lett, even if the cleaning clothes are dirty. Additionally. our micro-fiber cleaning clothes on both cleaning wheels are easily replaceable and washable.

HOBOT-188 adopts micro-fiber cleaning Oaths. easily changed for washing and reusing. Mainly 3 kinds of AUTO modes and manual mode ore included.

ROBOT-188 uses a high volume, centrifugal pump which does not lower its pressure easily even if there is o small leakage so that H01301-188 can move on different surfaces. 

Thursday, November 12, 2015

7inch HDMI LCD (B), 800×480, supports various systems

7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems


  • 800×480 high resolution
  • Capacitive touch control
  • Supports Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
  • Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
  • Supports BB Black, comes with Angstrom image
  • Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case)
  • HDMI interface for displaying, USB interface for touch control
  • Back light control to lower power consumption

Supported mini PC
mini PC Driver Image
Raspberry Pi B Raspbian Raspbian
Raspberry Pi A+ Raspbian Raspbian
Raspberry Pi B+ Raspbian Raspbian
Raspberry Pi 2 Model B Raspbian Raspbian, Ubuntu
Banana Pi - Raspbian, Lubuntu
Banana Pro - Raspbian, Lubuntu
BB Black - Angstrom

Note :
Drivers can be added to your current system to support LCD display and touch control.
Images CAN NOT be used with your current system. They're stand-alone systems which support LCD display and touch control already.

Botvac D80 / D85

The high-performance robot vacuum, specially designed to pick up all types of hair—ideal for homes with pets.

Features a combo brush that is uniquely designed to pick up pet hair—and is quieter, too, especially on hard floors like wood and tile. Patented laser-guided technology scans and maps the room, plans, and methodically cleans, automatically moving from room to room. 50% larger brush, bigger-is-better dirt bin, extra large filter, and precise edge cleaning brush pick up more dirt and debris. Schedule daily cleanings or push a button for instant multi-room or spot cleaning. Automatically goes back to charge base, then returns to where it left off.

Product Dimensions
  Metric U.S. Standard
Length 32.1 cm 12.7 in
Width 33.5 cm 13.2 in
Height 10 cm 3.9 in
Weight 4.1 kg 9 lbs

Battery NiMH (nickel metal hydride)
Charger Voltage 110V, 220V

Monday, November 09, 2015

Phantom 3 Professional

The Phantom 3 Professional is the best quadcopter that we've reviewed to date. It takes the ease of use that made us enamored with our previous Editors' Choice, DJI's Phantom 2 Vision+, and refines just about every aspect of operation. The video quality is a huge step up—you can record 4K footage to a memory card and stream 720p clips to YouTube. The remote control is better designed, with more physical controls, an integrated battery, and the ability to accommodate a full-size iPad as your flight monitor. The 720p Live View feed that streams to the monitor is crisp and smooth (within a reasonable operating range), so you can pilot the drone with confidence even when it's left visual range.

  • Included 4K Video / 12 Megapixel Photo Camera
  • Integrated 3-Axis Stabilization Gimbal
  • Easy to Fly, Intelligent Flight System
  • Live HD View
  • Dedicated Remote Controller
  • Powerful Mobile App w/ Auto Video Editor
  • Vision Positioning for Indoor Flight

Xiro Xplorer V

Xiro Xplorer V
This drone technology brings high and claimed an affordable price in its class. Drone was performed with a modern design, with a remote control that is lightweight and comfortable to carry, the battery is large enough, and with a high quality camera with dreadlocks (camera stabilizer) will make the experience record the moments around as he flew into a fun and easy.

With a similar appearance as a weapon of Japan (suriken) and a symmetrical shape with a model and a modern black color makes the drone is not only cool but also reliable when used to roam wherever and whenever. Clad in black color will make it visible while flying during the day.

Xiro Xplorer has flexible legs which functions when used with or without a camera mounted camera, is made so that when the landing is stable and not directly hit at the camera. While the remote control of the Xplorer V is also fairly lightweight and made with a comfortable material when operated. In the center there is also a holder for hanging around the neck so that when operating the remote is not tired.

Not to forget the remote control Xiro Xplorer V also a holder that serves as a smartphone holder. Holdernya for smartphone cradle is strong enough and flexible so that when the screen is conditioned distance forward, backward, left, and right so easy.

Loaded Sophisticated Features
Talk about the features, no doubt about that Xplore V has been equipped with a number of capabilities, such as:

Return To Home: with this feature drones will automatically return to a flying start when the feature is enabled or lost signals from remotenya, and also when the battery is running low drone drones will fly back to the starting place.
Follow me: a feature in which when activated drones will follow the direction to move wherever the remote control.
Mapping: When this feature is enabled then we can set the appropriate settings service flights drone route that we ordered, so automated drones will fly in the direction of the goal that we created automatically.
Altitude Mode: a feature where the drone is possible to fly silent and stable at a certain point, so it is very helpful when recording or taking pictures so that the result is more stable.
Wireless Image transmission: this feature is the same as the FPV where we can see the results in the screen capture directly drone our gadgets, other than that we could see the setting, the battery indicator, distance, and others.
2D Stabilized 3 axis Gimbal; 2-dimensional camera that can move up and down as well as good quality gimbal stabilized make recordings. For the camera is also equipped with a Full HD 14 MP camera with sensor technology from Panasonic that can generate smooth and sharp image quality.

  • Wireless connection between Remote for Smartphone
  • Intelligent FOLLOW ME objects simply by pointing at the screen smartphone
  • OBJECT ROTATION 360 can record video with the surrounding objects themselves.
  • 3D Gimbal Systems Module, Easy removable plug without tools.

  • Frequency: 2.4 GHz
  • Quadcopter battery: 11.1 V 5200 mAh 3 s battery lipo
  • Transmitter batteries: 3.7 V 4000 mAh
  • Transmitter working voltage / current: 3.7 V / 450 mAh
  • Transmission distance: 500 m max
  • Charging time: About 2 hours
  • Flying time: Up to 20 minutes
  • Receiver sensitivity: -93dBm
  • Camera: 14 MP Full HD
  • Sensor: Panasonic
  • Aperture: 1 / 2.3 "
  • Rotational speed: 200 degrees / s
  • Working voltage / current: 11.1 v / 12.5A
  • Horizontal speed: 15 m / s max
  • Vertical speed: 6 m / s max
  • 8 above iOS App / Android 4.4 or above
  • Features: GPS, Compass, Altitude, folow me, mapping, RTH (Return To Home)

Wednesday, November 04, 2015

HiTi CS-200e Dual-Sided Card Printer

The CS-200e Dual-Sided Card Printer Kit from HiTi outputs a monochrome ID card in 5 seconds and a color ID card in 20 seconds. The printer's dye sublimation process requires no ink cartridges and little maintenance for maximum uptime. The printer comes with software that makes designing ID cards a simple process from ID photo editing to card design and layout. Additionally, the software provides database connectivity so you can extract employee info directly into the program for seamless integration.

• Module Enables Auto 2-Sided Printing
• Color: Up To 180 Cards/Hour
• Monochrome: 1400 Cards/Hour
• Resolution: 300dpi
• Compact Design
• Quiet Operation
• Software Included

HS-202B Ratchet Control Crimping Tool

HS-202B Ratchet Control Crimping Tool Aids in connecting with a cable connector (crimping)

- Suitable for the type of cable: AWG 22-26, 10-22 AWG
- Used for bare terminals and telephone conneting plate

CADIK DL-686 crimping tool

CADIK DL-686 crimping tool, RJ-11/RJ-45 Crimping Tools for network/ telecomunication tools 

Tuesday, November 03, 2015

MIT310-EN Insulation Tester for Electricians (Industrial)

The complete range of the MIT Series provides indication of insulation resistance up to 999Mohms, 200mA continuity testing, and a fast-reacting continuity buzzer.

Developed, after extensive customer research, specifically to meet the needs of today's electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to use, but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse.

The range includes four models, ensuring an exact match for the needs of every user, all of which offer automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions. The units also conform fully to IEC 61010-1 for use in Category III 600V applications, and provide all of the facilities needed to meet insulation testing requirements relating to the current edition of the IEE Wiring Regulations.

  • Extremely easy to use
  • Tough rubber armoured case
  • Self contained protective cover
  • Live circuit warning
  • Weatherproof to IP54
  • Intelligent Safety System for protection

TDR1000/3P Single channel L V cable fault locator

A state-of-the-art single channel TDR capable of indentifying and locating faults on metalic cables. The TDR1000/3P is suitable for use on both dead or live cables.

The TDR1000/3P is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type. Four output impedances are available (25, 50, 75, and 100 Q) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user. 


  • Simple operation
  • AUTO set up for instant use
  • Ultra fast pulse for near end fault identification
  • Trace HOLD feature to allow comparison between cables
  • IP54 rating offers real life working
  • No blocking filters require
  • Supplied with fused test leads

Monday, November 02, 2015

SCL3711 - Contactless Mobile Reader

The state-of-the-art multi-protocol feature set qualifies the SCL3711 to be used in a wide range of applications, e.g. payment, loyalty and ID schemes, or to enable devices with NFC connectivity.

SCL3711 can be supported by SCM's middleware that resides above the PC/SC API and offers better portability of applications and abstraction of smart card related details that need to be handled by applications developed on top of the PC/SC API.

An evaluation kit and a software development kit are available.

  • Multi-protocol 13.56MHz contactless reader:
  • ISO14443 type A & B
  • FeliCa™
  • PC/SC compliant

RFID Label SLB01

SLB01-13.56MHz RFID sticker label is developed based on NXP RFID chipset, which is connected to aluminium coil and then pressed on paper. And the other side is PVC covered by adhesive sticker.

RFID label stickers that are compatible with the RFID reader / Writer SL013, SL025B, SL025M, SL018, SL030, SL031, SL032, SL040, SL500L, SL500A, SL500F or ISO14443A protocol. This module can be used for library management, ticketing, tracking documents, etc.

Tech Specs:

  • Frequency 13.56MHz
  • Protocol ISO14443 
  • Chipset MIFARE™ Classic 1K,
  • Material Aluminous antenna + Self-adhesive
  • Temperature -10°C ~ +50°C
  • Dimension 45 × 28 mm